Oregon Law
Law as of Jan 1, 2026
Chapter contents
816.010Authority to adopt and enforce standards for lighting equipment; testing for compliance with standards 816.020Motor carriers under jurisdiction of Department of Transportation 816.030Selling noncomplying lighting equipment; penalty 816.040Lighting equipment standards; effect of rules 816.050Headlights; rules 816.060Auxiliary lights 816.070Passing lights 816.080Taillights 816.090Registration plate lights 816.100Brake lights 816.110Back-up lights 816.120Turn signals 816.130Parking lights 816.140Cowl or fender lights 816.150High beam indicator 816.160Rear mounted lighting system 816.170Spotlights 816.180Reflectors 816.190Marker lights 816.200Clearance lights 816.210Identification lights 816.220Exempt-vehicle safety lighting equipment 816.230Fog lights 816.240Hazard lights 816.250Police lights 816.260Bus safety lights 816.270Mail delivery lights 816.280Warning lights 816.285Fire department warning lights 816.290End load lights 816.300Operation with nonstandard lighting equipment; penalty 816.310Exemptions from lighting equipment requirements 816.320Lighting equipment required for motor vehicles 816.330Operation without required lighting equipment; penalty 816.340Exemptions from required equipment 816.350Prohibitions on number and kind of lights for certain vehicles 816.360Use of prohibited lighting equipment; penalty 816.370Exemptions from lighting equipment prohibitions

Chapter 816 — Vehicle Equipment: Lights

ORS 816.200 Clearance lights

Each of the following is a requirement for clearance lights as indicated:

(1)

The following types of clearance lights shall be placed as indicated:

(a)

Front clearance lights shall be placed on the front of the vehicle. When more than one front clearance light is required under ORS 816.320 and 816.330, at least one front clearance light shall be on each side of the front of the vehicle.

(b)

Rear clearance lights shall be placed on the rear of the vehicle. When more than one rear clearance light is required under ORS 816.320 and 816.330, at least one rear clearance light shall be on each side of the rear of the vehicle.

(2)

The following are the colors for indicated type of clearance lights:

(a)

Front clearance lights shall be amber.

(b)

Rear clearance lights shall be red.

(3)

Clearance lights shall be mounted on the permanent structure of the vehicle in such a manner as to indicate its extreme width and shall be mounted as near the top of the vehicle as practicable.

(4)

Clearance lights may be mounted in combination with side marker lights if illumination is given as required with reference to both.

(5)

Clearance lights that are required under ORS 816.320 and 816.330 shall be mounted, so far as practicable, in such manner as to reduce the hazard of being obscured by mud or dust thrown by the wheels.

(6)

Clearance lights shall be capable of being seen and distinguished at a distance of 500 feet directly from that part of the vehicle on which the lights are placed.

Official sources · 1Tap to view provenance and version history

Online copy of the published ORS edition

This independent, nongovernmental service preserves the official source behind every rendered section.

Provenance

Version history

Prior statutory text is not available in the ingested published editions. Consult an earlier official ORS edition or the cited Oregon Laws chapter.